A833 transmission identification

There are two basic types of the New Process A-8transmissions used by Mopar muscle cars. They are easily identified by the length of the tailshaft.

Transmission and Drivetrain Tech. Long tailshaft transmission s are 27″ inches from where they mount to the bellhousing to the end of the transmission and are found in the mid size and larger B-body, E-body and C-body cars as well as light trucks and vans into the 80’s. Chrysler A-8four-speed manual transmission s — history, tech, and swap. Editor’s note: Chrysler described the change as “an A-8four-speed transmission , converted over to a three speed manual transmission with an overdrive gear ratio.

A8- Identification and HELP! It was used with both the 3Vand 2slant six. When it comes to vehicle transmission s, you want one that is known for durability and longevity.

Here is the picture of casting on main case. I saw on internet that it should be PP8and after that digits that represent year, but mine is not like that as you can see. By comparison, the Tand Muncie 4-speeds use a reverse gearset outboard of the main case.

The outboard design requires an additional mid plate. A detailed parts illustration is provide find the part you need! IDENTIFICATION - Cast iron case or aluminum side-loaded case, all forward speeds synchronized. Manufactured in both direct drive and overdrive models.

List of Chrysler transmissions. Jump to navigation Jump to search.

The pinion bearing retainer is the cast piece bolted to the front of the transmission that fits into the round hole in the rear of the bellhousing. Check the following table to identify the retainer size and corresponding drive pinion bearing in your transmission. The one weakness holding them back from total domination on the streets and strips was with their dated and tired manual shifter, the BorgWarner T-transmission. That all changed with the advent of its replacement, the New Process A833. Obviously a transmission with ratios for a 2. Manual transmissions designed for gasoline engines will have poor drivability if used with a diesel engine, and vice versa.

I know atleast RebelDryver is running one of these. Thanks to all the contributors who helped with this Tech Article. A Guide to Chrysler Four Speeds for Slant Six Engines by Doug Ahern. If the position of the shifter has to be change there are several different mounting-plate adapters available from aftermarket suppliers as well.

Also, the original clutch linkage, including the z-bar, will be the most compatible for retrofitting this transmission. There are also two different transmission output shaft diameters—a 1. A-9TorqueFlite, and a 1. A-8and A-7TorqueFlite transmissions. Gordy at Sticks Only was the only one in LA that knew what the hell it was when I showed it to him. Shift Heads: A Brief History of The A-8New Process 4-speed. There was a synchronizer design change for ’with modifications to the strut key and slider design.

Also, new Road Runner owners – and the magazines that tested the car – did not like the Inland rods and shifter one bit. Mopar listened and the Hurst unit re-appeared during the year. For best , please be specific and be patient. Passon Performance is the world leader in transmission technology for your Chrysler, Dodge, or Plymouth vehicle! It even still has what I’m assuming is the original Hurst Competition Plus Shifter.

I didn’t know what I had at first. I was just looking for a four speed and scattersheild for my Plymouth coupe. Other than the bolt pattern, the transmissions appear identical. The position of the letters and numbers is consistent between both the engine and. New, Used and OEM Automotive Parts - Large Inventory - Great Prices.

Take note of the number and location. The staff has been amazing to work with and takes care of their customers better than any other company I have ever dealt with. For a manual transmission an aluminum identification tag is secured by two bolts to the power take off cover. If you need to replace the cover do not discard of the tag.

In other models, a blue ID tag is permanently attached to the left side of the transmission case, at the top, near the case cover. The new transmissions have clearances between components in the. Sorry to hear about the leaking side case. MyMopar is the best Mopar forums and site on the web.

The transmission in question is a New Process 44 or NP440. Its an overdrive speed derived from the Mopar version called the A833. The 2came with the OD transmission. Free Brushed Aluminum T handle. We have included information on how to identify individual transmissions , application information, model year, detailed kit and part availability by transmission type.

Reference material to assist you in identification. Our remanufactured transmissions give the best shift out of anyone else, ensuring your drive has the best performance. The Aisin-Warner AXtransmission is a very successful, medium-duty, standard shift, five-speed transmission.