Cooling system vacuum fill tool

This is the best way to fill and test your cooling system by far. Quickly refill tool with coolant to refill entire cooling system quickly without producing air bubbles. This kit eliminates the need for bleeding and purging system to re. AIRLIFT COOLING SYSTEM AIR PURGE is rated 5. In-store: set your location. Used to seal vacuum hoses, fuel lines and radiator hoses plus other flexible materials.

You can fill and bleed the cooling system in under minutes. What I hate about it, is that you have to switch hoses after you put the vacuum on the system , to then, fill the system with coolant. Refills the entire cooling system including the heater core. Check for leaks while under vacuum.

This Mityvac vacuum pump performs over a dozen auto diagnostics and service applications including emission control systems testing, turbocharger waste gate testing, vacuum and pressure brake bleeding, ignition system diagnostics, fluid transfer and evacuation, cooling system pressure testing and automatic transmission service. CAD Each(free shipping) Also Buy your Snap-on Tool Review Stickers here! Open the refill valve (blue lever) and the coolant will start to fill the cooling system. A system without a vacuum leak will fill in about minutes.

NOTE: If the refill tube end comes out of the coolant during the refill process, air will be pulled into the system and the entire procedure will need to be repeated. Eliminates overheating due to trapped air in cooling system. Can be used with Schwaben fluid extractors or with shop air - standard air compressor with a minimum rating of PSI ( bar).

Loaner Water Pump Tool (2) AutoZone Rewards℠ Join Today and Earn a $Reward. Easily eliminate cooling system air locks that can cause overheating. Gauge protector helps prevent damage to gauge housing. Push button vacuum valve for easy valve operation. Allow engine and coolant system to cool completely before use.

I use this kit regularly to fill. The only proven way to get the cooling system filled right the first time is with a vacuum fill kit. It draws all of the air out of your cooling system then injects coolant to fill the system completely, no air bubbles. If air remains in the system after you fill it with coolant (if you don’t use this tool ) you may notice the heater not working. This product is made of high-quality materials to serve you for years to come.

Designed using state-of-the-art technology and with customers. A vacuum dam allows you to open up the cooling system without having to drain it for stuff like replacing a sensor or small line. To use this metho you need a vacuum tool for this and compressed air (Depending on the tool ). However, this method is creating a vacuum and sucking out all the air from the coolant system within seconds and then fill all the vacuum space with the coolant system instead. The reason this tool works so well is due to the venturi valve, it converts air pressure from the compressor to vacuum inside the cooling system , then with a twist of a valve sucks coolant right into the system using the vacuum pressure. Network Tool Warehouse is not responsible.

Porsche specialist were charging to vacuum fill the system. Please follow the System Burping Instructions found in our other DIY page here. Scroll down midway to find the burping and air-bleeding instructions.

Perfect for refilling the cooling system after a water pump, hose, or thermostate change, or for flushing your coolant system. A refractometer is the most accurate tool for measuring mix ratios. Refilling the cooling system can be accomplished without special tools, but we prefer a vacuum refill tool. Just insert the tool ’s rubber cone into the coolant jug neck and connect the tool to shop air. INSTRUCTIONS FOR: COOLING SYSTEM VACUUM PURGE AND.

Dramatically reduces cooling system refill time, without mess and without introducing air-locks. No more time consuming cooling system bleeding. Simply plug into the workshop air line, attach to the cooling system header tank and create a vacuum. You have to supply the one part that connects the vacuum to your compressor.

I was dreading having to bleed the coolant system on my car but this made it very easy. CFM vacuum generator, and large fluid passageways to give the refiller a fluid flow rate of 2. Time-saving, no additional bleeding necessary. A funnel should be used to prevent splashing, and a tester can be used to ensure proper mixture. How well would something like this work?

Vacuum -type cooling system filler. Coolant Flush and Fill Machines.

A coolant airlift tool is a pneumatic cooling system refill and testing tool that has become a necessity for Ford diesel engine servicing and diagnostics. Using the Venturi effect, it employs compressed air to create a vacuum that is applied directly to a vehicle cooling system. Email Tool Inquiry Anytime. Get deals on automotive parts, truck parts and more.

Venting and filling cooling system with vacuum filling. True but this particular truck has a regular cooling system and theres no tricks to filling it other than what I described. I remember those stupid VW vans that were a real pain to fill and a vacuum bleeder might help with those. There are several ways to get the trapped airout of the cooling system. Some will remove the hose from the head to the heater core.

Then sucks in the coolant. Thats the best system but the tool is expensive. Save cooling system vacuum filling to get e-mail alerts and updates on your eBay Feed.

Unfollow cooling system vacuum filling to stop getting updates on your eBay feed.