Monday 18 February 2019

Glove box latch broken

Fixing a broken glove compartment latch requires removing the glove box and replacing the locking mechanism. The locking mechanism is generally comprised of a small latch , and it requires a basic set of hand tools to replace. Q: The glove box latch is broken and I want to know how to pull it out, pretty basic question! Open up the glove box and remove all the stuff inside it. Glove box latch issues have been reported in various models of the CLK class, including the CLK55.


As these vehicles age and the glove boxes accumulate more wear and tear, the latches can begin to fail over time.

glove box latch broken

This latch secures to a catch (often a rectangular loop). When the glove box is working fine, the latch grabs hold of the catch. It is not until the handle is pulled that the latch retracts, pulling free from the catch.


With a glove box lock, you can interrupt the handle’s ability to freely retract from the catch. Welcome to Justanswer, My name isXXXXX am here to help. You have the latch out you need to get that off.


With the latch off you can pull the releases to open the door. The latch is broken and the box is closed. We can pull the release on the latch , but nothing happens. Other vehicles, however, do not require this step. Step 2: Take out the retainer that holds the glove box latch in place using the screwdrivers.


Press the end of the screwdriver against one of the open ends of the latch. A Auto Parts 17views. With the glove box door out of the vehicle, closely inspect the latch for causes of jamming. If there is nothing obvious, then the most likely cause is simple lack of lubrication.


Apply some light oil to any and all moving parts in the latch and move it back and forth to disperse the lubricant and free up the mechanism. How to open a glove box door when the latch is broken on. Else you have to knock out the hinge pin on both hinges, open the door from the bottom and see if you can swing the door up to undo the latch.


If this does not work, cut a hole in the bottom ot the glove box , it is usually made of plastic or papier mache, release the latch from inside,. Exact same thing happened to me, about the fourth time I ever opened the glove box. I managed to get one of the prongs back out and (with the aid of a rubber band) managed to get the thing shut.


This was a warranty fix, but it took VW about three weeks to get the part to the dealer. Dust off the glove compartment with your cloth ensuring that it is completely clean before pushing the glove box into place. Replace the Glove Box Finally you should be able to put the glove box complete with its new latch back into its seating in the car dashboard. This will then require you to turn the two holding screws back into place. Your order may be eligible for Ship to Home, and shipping is free on all online orders of $35.


Yep, the glove box itself comes out after you remove two screws as described in the post above. Then, after you get it out, there are screws that hold the latch assembly to the glove box. Take those out and the latch assemble comes right out. Everyone oohs and aahs over the paint and chrome on a freshly restored car, and of course everyone wants to check out the monster under the hood. But no matter how great your car looks or.


That clue was all I needed. I removed the moulding (there were no screws visable) by pulling hard. With mine, I unlocked the glove box first, then stuck the same key in and flipped the key up.


Install the New Latch It’s now a very simple case of taking the new latch and putting it into place on the front inside edge of the glove compartment. Using the two screws that held the previous latch in place, attach the new latch, tightening the screws until they are at the fullest tightness.

glove box latch broken

Broken glove box pully thingy bob audi sport quick easy fix for broken glove box door audiworld forums quick easy fix for broken glove box door audiworld forums quick. Best Answer: You can buy a replacement glove box from a salvage yard for about $25. Fill out the required information.


Check your local salvage yard. Remember, if you replace the glove box door you will also need to change the glove box lock. Slide it from the top where the handle would be and activate the latch. After you get it open, take the glove box door apart and remove the latch. Now remove one of the storage compartment latches (behind the seats) install that in the glove box.


This will give you time to locate a replacement latch which then you can put it in the storage compartment. Glovebox Latch Fix Kit AARODRIGUEZ CORP. AARodriguez Corp has created another simple solution to a annoying problem. Many glove box latches have broken , resulting in a glove box door that does not close. This kit uses a system of strong magnets to give your glovebox a magnetic latch that will be problem free.


For all MkIV Jetta, Golf and New Beetle. Unfollow honda civic glove box to stop getting updates on your eBay Feed. My original (non-locking) latch broke one cold morning when I opened the box.


I was told that I would have to replace the whole glove box , which costs in the neighborhood of $3brand new.

No comments:

Post a Comment

Note: only a member of this blog may post a comment.

Popular Posts