T-3TRANSBRAKE Part # 3530THIS TRANSBRAKE IS FOR NON-LOCK UP TRANSMISSIONS This transbrake should be installed only by qualified personnel.
Improper installation may cause property damage, personal injury or death. TRANSMISSION REMOVAL The transmission must be removed from the vehicle to properly prepare it for transbrake operation. Install intermediate overrun clutch retainer ring.
Tack weld snap ring to retainer. Turbo 3Transbrake - BTE 321500. TURBO 3TRANSBRAKE INSTALLATION INSTRUCTIONS.
In addition to providing the hard hitting launches that trans brake equipped turbo 3transmissions are known for, many racers find improved consistency in ETs using this combination. It is best to install the transbrake while the transmission is being rebuilt.
TH3TRANS BRAKE REV PAT. This is a reverse shift pattern valve body with no engine braking. Use these detailed Instruction Sheets as you build your winning race car.
You can find detailed installation guides for powerglide and other racing transmissions. Rob Stephan shows us how well a trans-brake can benefit a turbocharged car at building boost on the startline. Trans-Brake lesson 1- Stephan Racing Fullboost.
From a trans brake standpoint, IMHO a powerglide works best for them. DO NOT INSTALL ANY CHECK BALLS IN TRANS CASE (AS IN OEM)! Remove and discard governor. A deep pan is recommended. After trans installation , place car on jack stands and test transbrake.
Iron Powerglide Pro Brake Transbrake Valvebody The latest in kits for those who need a quicker reacting transbrake leaving on a Pro tree. Includes Powerglide Solenoi Brake Valve, Instructions and Decals. Used a th3lock up auxilary valve body w ith a th4to create a FPFM with brake. Also if you have too tight of gear train endplay install a 700rfront.
INSTALLATION INSTRUCTIONS FOR THE TURBO-400. Installation Instructions TH4INTERNAL TRANSBRAKE Part # 403080.
No comments:
Post a Comment
Note: only a member of this blog may post a comment.