Brake fluid level sensor

Repair Information You Need. Offers, Promotions, and Savings. We know our parts and products. However, a failed brake fluid level sensor will generally make itself known by switching on the brake fluid level warning light. Your order may be eligible for Ship to Home, and shipping is free on all online orders of $35.

Locate the anti-lock brake fluid level sensor on the brake fluid reservoir. There will be an electrical connector that plugs into it that sends the signal to the computer and turns on the warning light on the instrument panel when there is a problem. When it comes to brakes, you’d better not push your luck. If you take a chance or dare cut corners, the result could be low- or high-speed collision, damage written all over your vehicle, or even injury. This part is OEM and a Quality Fit!

Alaska, Hawaii, and Puerto Rico). Get deals on automotive parts, truck parts and more. AutoZone carries hundreds of thousands of parts and accessories. Select your Year, Make, Model and Engine to find those that fit your vehicle.

The brake fluid level sensor in a vehicle monitors the level of the brake fluid and alerts if you if goes below a certain level. This lets you know that there’s a problem in the braking system. Digi-Key Electronics - Wide variety of sensors in stock and ready to ship! Low brake fluid level could mean the loss of the vehicle braking system. Yes, If it is due to low fluid , keep in min that if your park brake switch (on the e- brake is bad or out of adjustment this will also turn the light-on) This is the level sensor (float connection) wires,Dont pull the wires just disconnect them!

To see if the level sensor is the issue. If I unplug the sensor to the reservoir, the light still stays on which puzzled me, but I’m. The E brake is not engaged and I found that if I unplugged the plug attached to the brake fluid level sensor on the master cylinder reservoir the light would go out as normal. The fluid level is within specs and not low.

Order this item and get free delivery and handling on your entire order!

Valid on orders shipped in the contiguous United States. The Audi Ahas a built in brake fluid level sensor that can warn of an approaching dangerous low level of fluid. Check the fluid level in the reservoir.

Choose top quality brands AC Delco, Standard Motor Products. Tech B says that the red brake warning light can be turned on if the brake fluid level sensor detected low brake fluid level. Find the Right Parts For Your Car, Truck, or SUV at AutoZone.

Sensing the fluid level in brake fluid reservoirs ¥ Sensing fluid level in gasoline, oil and other liquid reservoirs ¥ Air conditioner system condensate: detecting high water levels ¥ Coolant overflow fluid system sensing Figure 1. The anti-lock brake fluid level sensor can fail over time due to a number of problems, but most commonly through a lack of maintenance in terms of fluid changes.

Sensor physical layout Figure 2. Buy online, pick up in-store in minutes.

Get the brake fluid level sensor connector you need at Car Parts Kings. Live help, fast shipping and great service are at your fingertips. Reconnect the fluid level sensor and refill the master cylinder with fluid and reinstall the cap. Step Once the job is complete bleed the remainder of the brake system to remove any air from the system. The sensor , then, must be able to understand the difference between the brake fluid and these other components and not allow them to interfere.

In terms of operation, this liquid level sensor is submerged or floats in your car’s brake fluid and senses when it drops below a certain safe level. The ABS system has multiple sensors to detect wheel speed conditions and rapidly pulse the brakes, and the brake fluid lever sensor is one of them. Easy to use parts catalog. Sure enough it was the fluid level sensor causing the BRAKE light warning to illuminate.

When I disconnected the wires leading from the cap to the harness about inches away thereby breaking the circuit, the dash light went out and stayed out. The part is on top of the master cylinder but in front of the brake fluid reservior. Another example is a sensor to signal a dangerously low brake fluid reservoir level in automotive applications.

The brake warning light is also connected to the brake fluid level sensors in the master cylinder reservoir(s). If the level is low, more fluid should be adde and the leak should be found and repaired as soon as possible. If the brake warning light comes on, the fluid level should be checked.

BE SURE TO USE THE RIGHT FLUID. Designed utilizing the latest technology, this product by ACDelco features premium quality and will perform better than advertised. If that did not help, inspect the wire leads to the sensor on the brake reservoir or replace the sensor if level is proper. The conventional brake system includes a vacuum booster, master cylinder, front disc brakes, rear drum brakes, interconnecting hydraulic brake pipes and hoses, brake fluid level sensor and the brake indicator.

If there is a good connection, you should replace the fluid level sensor. With the ignition switch off, disconnect the parking brake switch and then turn the key on. Top up the resivior with brake fluid if required.

If the fluid level is down just a little bit (enough to turn on the light) it may be a sign that. There is no mention of a switch in the side of the reservoir. It sits within the reservoir and will alert you with a light on your dash when your fluid is low.